Expand your security options with our demountable vaults – designed to provide ultimate protection and customizable to fit your unique needs.
Reinforced versus demountable vaults
To build a reinforced concrete structure is both costly and time-consuming and must be constructed during the building process. These reinforced vaults are fixed structures and cannot be transported should the need arise to relocate to another building and is therefore lost for good.
In turn the installation of a demountable vault is considerably cheaper and can also be constructed in a relatively short period of time. To relocate is a simple task – the vault is simply dismantled and reassembled at a new location. The only limiting factor is the load per square meter that the building floor can carry.
The height, length and width are dependent on the customers’ requirements. So too the vault dimensions are not restricted to any standard sizes but rather customised to specification. All units are completely pre-assembled at Turnkey’s factory prior to installation to ensure a proper fit at the building site.
Customised to specification
Turnkey’s demountable vaults are also fully SABS tested and approved for:
- Category 2 ADM
- Category 3
- Category 4, and the highest level of
- Category 5
Demountable Vault Specifications:
Based on panel thicknesses, square meterage and door options.
Based on SABS Categories 2 ADM, 3, 4, & 5 (SABS 949-1967).
These are made internally so that no fixings are visible from the exterior.
Roof and Floor
The roof and floor sections are recessed into the side sections to prevent side access.
SABS Categories 2 ADM, 3, 4, & 5 (SABS 949-1967).
Standard fittings are SABS Category 2ADM, 3, 4, or 5 main doors. The door is supplied with a four wheel combination lock and two eight lever key locks. A ramp is also supplied.
The Vault can be fitted with a SABS Category 3, 4, or 5 emergency door, a grille gate with up to three key locks, and additional combination, key or time locks can be fitted to the doors.
Additional benefits of a demountable vault:
Can be designed to meet the size requirements of the client.
Allowance is made for the provision of:
- Lighting, and any
- Electric security devices should they be required.